200-301: Cisco Certified Network AssociateDemo

SIMULATION

Guidelines

This lab item requires tasks to be completed on virtual devices.

• Use the Tasks tab to view this lab item's tasks.
• Use the Topology tab to open the device console(s) and complete the tasks.
• Access the console for each required device by selecting its device icon or the tab(s) above the console window.
• All required preconfigurations are already applied.
• Do not modify the enable password or hostname on any device.
• Save the configurations to NVRAM before continuing to the next item.
• Select Next at the bottom of the screen to submit this lab and proceed to the next question.
• After Next is selected, the lab closes and cannot be reopened.

Topology

Tasks

Refer to the topology. All physical cabling is installed. R3 and R4 are fully configured and cannot be accessed. Configure static routes for connectivity to the ISP and to the LAN located on R4.

1. Configure a default route on R2 to the ISP.
2. Configure a default route on R1 to the ISP.
3. Configure R2 with a route to the server at 10.0.41.10.
4. Configure R1 with a route to the LAN that uses R3 as the preferred primary path.