200-301: Cisco Certified Network AssociateDemo

SIMULATION

Guidelines

This lab item requires tasks to be completed on virtual devices.

• Refer to the Tasks tab to review the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and complete the tasks.
• Console access is available for every required device by selecting its device icon or using the tabs above the console window.
• All required preconfigurations have already been applied.
• Do not modify the enable password or hostname on any device.
• Save the configurations to NVRAM before proceeding to the next item.
• Select Next at the bottom of the screen to submit this lab and continue to the next question.
• After Next is selected, the lab closes and cannot be reopened.

Topology

Tasks

VLANs 35 and 45 are configured on all three switches. All physical connectivity is installed and verified. Every inter-switch link must be operational.

1. Configure SW-1 and SW-2 ports e0/0 and e0/1 for 802.1Q trunking that permits all VLANs.
2. Configure the inter-switch links on SW-1 e0/2, SW-2 e0/2, and SW-3 e0/0 and e0/1 to use native VLAN 35.
3. Configure SW-1 and SW-2 ports e0/0 and e0/1 for link aggregation. SW-1 must immediately negotiate LACP, and SW-2 must respond only to LACP requests.