A storage administrator is facing degraded performance for the VMs running on a vSAN enabled vSphere Cluster and needs an out-of-the-box tool to identify the root cause of the problem.
A host in the cluster experiences a permanent NIC failure, and the replacement part will not arrive until the next morning. The administrator needs to ensure the availability of the production workload at all times.
Which step should be taken by the administrator to meet this goal?
ADisable the vSAN Service on the VMkernel port
BPerform a live vMotion to another host
CEnter Maintenance Mode with "Full Data Migration"
DShut down the production VMs
A vSAN administrator wishes to implement HCI mesh between two clusters that are located in geographically separate data centers.
Which two possible options must the vSAN administrator choose to achieve this configuration? (Choose two.)
ANIC teaming implemented for the vSAN network VMkernel port
BA leaf spine topology for core redundancy and reduced latency
CSpan vSAN cluster communication across the same Layer 2 network
DRoute vSAN cluster communication via different vSAN networks over Layer 3
EvSAN encryption disabled prior to configuring HCI mesh
A vSAN administrator has recently upgraded to vSAN. The vSAN administrator wants to control the amount of Capacity Reserve to use the underutilized capacity of ~140TB in the cluster of 12 vSAN ReadyNodes and 400TB storage for vSAN internal operations.
Which two options should be used to accomplish this goal? (Choose two.)
ASlack Rebuild Reserve
BCapacity Plan Reserve
CHost Rebuild Reserve
DOperations Reserve
EBuffer Reserve
The objects on a four-node vSAN cluster are assigned a RAID-5 policy. A network outage occurs, causing host one to lose connectivity with the rest of the cluster. Seventy-five minutes have elapsed.
What is the health state of the objects?
ANon-availability related incompliance (non-compliance)
BReduced availability with no rebuild - delay timer
CReduced availability with no rebuild
DReduced availability
Question 6
Administrative and Operational Tasks
0
Question 7
Performance-tuning, Optimization, and Upgrades
Question 8
Troubleshooting and Repairing
Question 9
Installing, Configuring, and Setup
Question 10
Administrative and Operational Tasks
Question 11
Administrative and Operational Tasks
Question 12
Troubleshooting and Repairing
Question 13
Troubleshooting and Repairing
Question 14
Performance-tuning, Optimization, and Upgrades
Question 15
Installing, Configuring, and Setup
Question 16
Administrative and Operational Tasks
Question 17
Troubleshooting and Repairing
Question 18
Administrative and Operational Tasks
Question 19
Performance-tuning, Optimization, and Upgrades
Question 20
Planning and Designing
Question 21
Troubleshooting and Repairing
Question 22
Installing, Configuring, and Setup
Question 23
Installing, Configuring, and Setup
Question 24
Performance-tuning, Optimization, and Upgrades
Question 25
Planning and Designing
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ad
Want a break from the ads?
Become a Supporter and enjoy a completely ad-free experience, plus unlock Learn Mode, Exam Mode, AstroTutor AI, and more.
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Which two vSAN health finding categories are part of Skyline Health? (Choose two.)
APhysical Disk
BHosts
CVirtual Disk
DPerformance Service
EData Center
An administrator will be performing a rolling upgrade of a vSAN cluster over the weekend. In preparation, the administrator runs the Data Migration Pre-Check.
Which two items are being checked? (Choose two.)
ACluster capacity
BDRS settings
CAffinity rules
DObject compliance and accessibility
EvSphere HA state
A vSAN administrator has deployed a new All-Flash vSAN cluster and would like to perform a health test on it to verify that the network performance is meeting the network throughput requirements.
Which tool should be used for this purpose?
AvSAN Proactive Test
BvSAN Skyline
CIOInsight
DvSAN Cluster Performance
A vSAN administrator has reported a security vulnerability to the security officer of the organization. Currently, the vSAN cluster runs on the latest version of vSAN. The administrator suggests patching the vSAN cluster and gets approval from the security officer to apply the latest patch for vSAN.
The administrator uses vSphere Lifecycle Manager to apply the patch to the current image. The organization requirements state that patches should be installed as fast as possible on the hosts.
Which configuration should the administrator apply to complete this installation?
AEnable the quick boot setting in the host remediation settings for the images
BEnable the quick boot feature in the host remediation settings for the baselines
CDisable HA admission control in the host remediation settings for the baselines
DEnable the suspend to memory feature in the host remediation settings for the baselines
Which two conditions should be verified before removing an ESXi host from a vSAN cluster? (Choose two.)
AEncryption is disabled.
BESXi host is in maintenance mode.
CPerformance Service is disabled.
DData evacuation is complete.
EResyncs are running.
An administrator wants to check the vSAN cluster health during the maintenance window while vCenter Server is offline.
What are two ways to complete this task? (Choose two.)
AvSphere Host Client
BHCIBench
CESXi system logs on vSAN datastore
Desxcli
Eesxtop
A vSAN Administrator has a cluster of six vSAN nodes. The vSAN datastore was 55% utilized, and due to a power outage, one node was lost. The vSAN administrator needs to resolve the storage policy compliance for the virtual machines on RAID-5.
Which action, if any, needs to be taken to meet this goal?
ANo action is needed since vSAN automatically rebuilds the objects
BThe one failed node must be restored
CChange the RAID-5 FTT from 2 to 1
DTrigger vSAN object repair from ESXCLI
A single disk in a vSAN OSA disk group suffers from an unrecoverable hardware failure. This causes vSAN to set the health status for all disks in the group to Permanent disk loss, indicating disk failure. All other disks, however, have not suffered from a hardware failure.
Why would vSAN mark all disks in this manner?
AThe vSAN disk management service has failed.
BDeduplication and compression are enabled.
CThe affected vSAN node is offline.
DThe key management server is offline.
An organization is facing vSAN storage capacity challenges on one of their vSAN enabled clusters, while other vSAN enabled clusters are underutilized.
Which vSAN feature should be used to resolve this challenge in the quickest way?
AvSAN Stretched Clusters
BvSAN Replication
CvSAN Datastore(s)
DvSAN HCI Mesh
A vSAN administrator has been asked to encrypt all traffic for data and metadata across all hosts in a vSAN cluster.
Which action is necessary to achieve this level of encryption?
ADeploy KMS server, and enable vSAN Data at Rest and In-Transit encryption at the host level
BEnable vSAN Data In-Transit encryption at the cluster level; no KMS or NKP is required
CEnable vSAN Cluster level encryption via Storage Policy; no KMS or NKP is required
DDeploy NKP server, and enable vSAN Data at Rest encryption at the cluster level
An administrator needs an esxcli system command that will place a vSAN host into maintenance mode using the "Ensure Accessibility" option.
Which esxcli system command will work?
A#esxcli system maintenanceMode set -enable false -e ensureObjectAccessibility true
B#esxcli system maintenanceMode set -enable false -m ensureObjectAccessibility
C#esxcli system maintenanceMode set -enable true -m ensureObjectAccessibility
D#esxcli system maintenanceMode set -enable true -e ensureObjectAccessibility true
When viewing the VMware Skyline Health: vSAN Object Health report, the vSAN administrator observes that the link "Repair Objects Immediately" is enabled.
What is the meaning of this message?
AImmediate action must be taken to effect object repair.
BThe repair delay timer has elapsed, and resynchronization has begun.
COne or more objects have become inaccessible.
DOne or more objects have absent components.
A vSAN administrator puts a vSAN host into maintenance mode with the option "Ensure Accessibility". Currently the vSAN cluster contains four hosts. In the meantime, another host failure occurs.
What happens to the vSAN cluster when the host exits maintenance mode?
ASince there were just two active hosts left, the vSAN cluster cannot be recovered anymore.
BData availability will be restored and VMs become available again.
CA disaster has already occurred due to the host failure and VMs remain unavailable.
DThe host comes back, but the cluster remains in a degraded state of operations.
A group of virtual machines on a five-node vSAN OSA cluster have the vSAN Default Storage Policy assigned to them. This policy has not been modified from its default settings to date. The vSAN administrator would like to reduce the amount of storage capacity consumed by these virtual machines.
Which action will produce this result?
AReduce the "Number of disk stripes per object" from 3 to 2 in the vSAN Default Storage Policy.
BAssign a policy with "Object space reservation" set to "50%и to the virtual machines.
CAssign a new policy with "Failures to tolerate" set to "1-Failure - RAID-5 (Erasure Coding)" to the virtual machines.
DSet "Failures to tolerate" in the vSAN Default Storage Policy to "2-Failures - RAID-1 (Mirroring)".
A host in a vSAN OSA cluster has the following VMware Compatibility Guide approved disks:
• 3 Solid State Drive (SSD) used for cache
• 12 magnetic Hard Disk Drives (HDD) used for capacity
Which two options are valid disk group configurations? (Choose two.)
A1 Disk Group with 3 SSD and 12 HDD
B4 Disk Groups with 3 HDD each
C1 Disk Group with 2 SSD and 6 HDD
D2 Disk Groups with 1 SSD and 6 HDD each
E3 Disk Groups with 1 SSD and 4 HDD each
A vSAN administrator notices the VMware Skyline Health: Network Latency Check reports indicate three hosts are non-compliant.
Which action should the vSAN administrator take?
ACheck VMKNICs, uplinks, VLANs, physical switches, and associated settings
BRerun the VMware Skyline Health: vSAN Cluster Partition report
CPlace the noncompliant hosts into an isolated network
DReboot the noncompliant hosts one at a time
A vSAN administrator has received a provisioning request, which will require increasing the vSAN cluster capacity by 25%.
Knowing Storage Pools is being used, with 7 devices per ESXi host.
What must the vSAN administrator do once the additional devices are received?
AAdd the devices directly to the storage pool and vSAN will automatically rebalance
BCreate a new disk group because the limit of 7 devices has been reached
CAdd the devices to the storage pool and schedule a maintenance window for rebalancing
DCreate a new storage pool then rebalance the capacity across the cluster
An administrator was asked to enable deduplication and compression in the existing vSAN cluster.
Which action must be taken prior to that action?
AEnsure there is enough space to perform disk re-formatting operation
BDisable vSphere High Availability
CConfirm that all virtual machines were powered off on vSAN Datastore
DTurn off vSAN
An administrator has discovered that space utilized by VMs does not decrease after deleting files and folders within the VMs. The administrator needs to be able to reclaim this space.
Which action could the administrator take to accomplish this task?
ASet the Object Space Reservation rule to 100%
BEnable TRIM/UNMAP for the vSAN cluster
CReboot the VM to recreate the swap file
DDisable Storage I/O Control for the vSAN cluster
A new vSAN ESA cluster with four hosts has to be designed for a single site architecture.
Which design decision is correct?
AUse storage components listed on the VMware Compatibility Guide
BInstall the hosts with a minimum of four HDDs or flash devices