2V0-15.25: VMware Cloud Foundation 9.0 SupportDemo
By Broadcom · Browse Mode
//
2V0-15.25: VMware Cloud Foundation 9.0 Support Practice Exam
QuestionQ1
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
Save question
An administrator performs an image-compliance check on a cluster containing a VMware ESX host configured with a DPU. The compliance check fails with the error: "Failed to start vAPI task on data processing unit". The lifecycle.log on the ESX host contains: "Invalid field software_spec in structure com.vmware.esx.settings_daemon.software.scan_spec.".
What causes this error?
AA component was removed from the image.
BA device driver is incompatible with the included firmware.
CA vendor add-on was not provided in the image.
DThe cluster was not assigned a default image.
0
Community Discussion
No comments yet. Be the first to start the discussion!
QuestionQ2
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
0
Community Discussion
No comments yet. Be the first to start the discussion!
QuestionQ3
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
0
Community Discussion
No comments yet. Be the first to start the discussion!
QuestionQ4
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
0
Community Discussion
No comments yet. Be the first to start the discussion!
QuestionQ5
Section 3 - Plan and Design the VMware by Broadcom Solution
0
Community Discussion
No comments yet. Be the first to start the discussion!
That's the end of the preview
It's free
100% of the questions are free for all users. No strings attached.
Section 1 - IT Architectures, Technologies, StandardsSection 2 - VMware by Broadcom SolutionSection 3 - Plan and Design the VMware by Broadcom SolutionSection 4 - Install, Configure, Administrate the VMware by Broadcom SolutionSection 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
An administrator deploys a new VMware Cloud Foundation (VCF) instance at a remote site, using a vSAN Express Storage Architecture (ESA) for the workload-domain cluster. vSAN ESA uses Auto-Policy Management and is intended to tolerate one failure. The cluster has a hardware failure, and the administrator finds that the impacted objects did not re-protect and remain in a "Reduced availability with no rebuild" state.
How can the administrator explain why the vSAN objects did not rebuild as anticipated?
AThe storage devices are not certified for vSAN.
BThe existing disk groups need to be expanded to support additional capacity.
CThe storage policy needs to be modified to support forced provisioning.
DThe number of ESX hosts doesn't support rebuilds during an outage.
An administrator must delete a workload domain in a VMware Cloud Foundation (VCF) instance.
The following details are provided:
The VCF instance contains two workload domains and a management domain.
The workload domain being deleted contains one vSphere cluster.
The workload-domain cluster has no user-created virtual machines.
When the administrator performs the deletion in VCF Operations, the task fails during the Gather input for deletion of NSX component stage. In the failed-task details, the cause is shown as: Cannot read the array length because "<local19>" is null.
What could be the possible cause of this error?
AThe Network Pools associated with the workload domain were deleted using the vSphere client.
BThe NSX Manager is shared between the workload domains.
CThe NSX Edge cluster for the workload domain was deleted using NSX Manager.
DThe NSX Edge Cluster Deployment Removal Tool was run against the workload domain.
An administrator is troubleshooting an NSX issue.
Which command can be used to verify the NSX VIBs installed on the ESX host?
Aesxcfg software list
Bnsxcli get version
Cesxtop -b -d 2 -n 100
Desxcli software vib list
An administrator plans to import a vSphere environment into VMware Cloud Foundation (VCF) as a workload domain. The vSphere environment has this configuration:
vSphere version 8.0 Update 3.
A three-node vSAN cluster with one OSA datastore.
Two vSphere Distributed Switches (VDS).
Three VMkernel adapters with DHCP-assigned IP addresses.
What change must the administrator make before importing this environment?
AUpgrade vCenter and ESXi to vSphere 9.0.
BUpdate the vmkernel adapters with statically assigned IPs.
CConvert the vSAN datastore from OSA to ESA.
DConsolidate to a single vSphere Distributed Switch.
QuestionQ6
Section 4 - Install, Configure, Administrate the VMware by Broadcom Solution
0
Community Discussion
No comments yet. Be the first to start the discussion!
QuestionQ7
Section 4 - Install, Configure, Administrate the VMware by Broadcom Solution
QuestionQ8
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
QuestionQ9
Section 4 - Install, Configure, Administrate the VMware by Broadcom Solution
QuestionQ10
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
QuestionQ11
Section 4 - Install, Configure, Administrate the VMware by Broadcom Solution
QuestionQ12
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
QuestionQ13
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
QuestionQ14
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
QuestionQ15
Section 3 - Plan and Design the VMware by Broadcom Solution
QuestionQ16
Section 3 - Plan and Design the VMware by Broadcom Solution
QuestionQ17
Section 4 - Install, Configure, Administrate the VMware by Broadcom Solution
QuestionQ18
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
QuestionQ19
Section 4 - Install, Configure, Administrate the VMware by Broadcom Solution
QuestionQ20
Section 4 - Install, Configure, Administrate the VMware by Broadcom Solution
QuestionQ21
Section 3 - Plan and Design the VMware by Broadcom Solution
QuestionQ22
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
QuestionQ23
Section 5 - Troubleshoot and Optimize the VMware by Broadcom Solution
QuestionQ24
Section 3 - Plan and Design the VMware by Broadcom Solution
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Ad
Want a break from the ads?
Go ad-free and unlock Learn Mode, Exam Mode, AstroTutor AI and every premium tool — everything you need to walk in prepared, and confident.
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
Save question
0
Community Discussion
No comments yet. Be the first to start the discussion!
An administrator manages a VMware Cloud Foundation (VCF) environment. Developers request that vDefend - Distributed Firewall be enabled, but it cannot be enabled because a license is missing.
Where must the new license be applied?
AVCF Automation.
BSDDC Manager.
CNSX Manager.
DVCF Operations.
An administrator is trying to import a certificate chain in VMware Cloud Foundation (VCF) Operations by uploading a certificate file. Validation fails with the error: “The provided certificate content is invalid.”
What could cause this error?
AThe certificate chain order is invalid.
BThe certificate chain is missing the root CA.
CThe certificate is not PEM-encoded.
DThe certificate chain does not include the private key.
An administrator has recently deployed a new three-node VMware vSAN Express Storage Architecture (ESA) cluster into an existing workload domain. After creating several Virtual Machines (VMs), the administrator finds that storage is being consumed much faster than anticipated.
During the investigation, the administrator finds that Auto-Policy Management set the datastore default policy to RAID-1 instead of the expected RAID-5.
What could be a cause?
AThe vSAN storage policy has Force Provisioning enabled.
BThe vSAN ESA cluster has Host Rebuild Reserved enabled.
CThe vSAN ESA cluster must have a minimum of four hosts.
DThe RAID-5 policy is only supported on a vSAN ESA storage cluster.
An administrator creates a tag for a virtual machine (VM) in VMware Cloud Foundation (VCF) Operations. When attempting to assign the tag to the virtual machine in vCenter, the tag cannot be found.
What is causing this error?
AThe tag was not pushed to Custom Groups.
BThe vCenter version is incorrect.
CThe tag was not pushed to the vCenter instance.
DVM Tools is not installed.
An administrator manages a remote VMware Cloud Foundation (VCF) fleet with this configuration:
One VCF instance with one Workload Domain.
The Workload Domain contains one VMware vSAN Express Storage Architecture (ESA) cluster.
VCF is licensed in disconnected mode.
The administrator finds a notification in VCF Operations indicating that the VCF licenses have expired. Which three actions should the administrator perform to resolve the issue?
Choose three
AUse the VCF Business Services console to export a new VCF license file.
BIncrease the license core count in SDDC Manager.
CImport the license file into VCF Operations and assign to the SDDC Manager.
DExport the usage file from VCF Operations and upload to the VCF Business Services console.
EImport the license file into VCF Operations and assign to the workload domain vCenter.
FRestart SDDC Lifecycle Manager Service in the VCF Operations console.
An administrator needs to verify which account initiates tasks from VMware Cloud Foundation (VCF) Operations. As a test, a virtual machine (VM) is powered on and off through VCF Operations.
In the vCenter task pane, which account would be shown as the task initiator?
AThe service account between vCenter and SDDC Manager.
BThe credentials of the logged in user.
CThe service account between VCF Operations and vCenter.
DThe [email protected] account.
Using the VMware NSX Manager user interface, an administrator has identified a BGP peering issue.
Which command on the NSX Edge Transport Node provides additional information about the issue?
Aget log-file routing follow
Bget edge-cluster history state
Cget edge-cluster status
Dget logical-routers
An administrator attempts to sign in to vCenter through the vSphere Client and receives a "no healthy upstream" error.
What are two possible causes?
Choose two
AThe vpxd service is not running.
BThe SSO Service is not running.
CPort 443 is not opened between the local machine and the vCenter.
DThe vmware-rbd-watchdog service is not running.
EThe administrator logged in with the root account.
An administrator signs in to the VMware NSX Manager UI and sees a “Remote Logging Not Configured” alarm on every NSX Management node.
What could be a reason for this issue?
AUpdate the NSX Edge Cluster Profile to configure a remote logging server.
BUpdate the NSX Node Profile to configure a remote logging server.
CUpdate the NSX Uplink Profile to configure a remote logging server.
DUpdate the NSX Configuration Profile to configure a remote logging server.
An administrator has a vSphere 8.0 Update 3 environment with this configuration:
A 3-node vSAN cluster
A vSphere Standard Switch (VSS)
Several standalone ESX hosts in the vCenter inventory
They want to convert this vSphere environment into a new VMware Cloud Foundation (VCF) 9.0 management domain.
Which two changes must they make before converting this vSphere environment to a VMware Cloud Foundation (VCF) management domain?
Choose two
ARemove the vSphere Standard Switch from the vCenter Inventory.
BConfigure a vSphere Distributed Switch.
CUpgrade vSphere 8.0 Update 3 to vSphere 9.0.
DRemove the standalone hosts from the vCenter inventory.
An administrator must expand an existing VMware Cloud Foundation (VCF) workload domain by adding a new cluster.
The VCF fleet is configured as follows:
Three workload domains, including the management domain, are configured.
The management domain (WLD-01) and one workload domain (WLD-02) run VCF 9.0.
The other workload domain (WLD-03) runs VCF 5.2.1 and is an isolated workload domain.
When the administrator attempts the required procedure in the vSphere Client UI, the cluster cannot be added to the WLD-02 workload domain. What should the administrator do to complete the workload-domain expansion?
AUse the SDDC Manager API to create the cluster in WLD-03.
BUse the VCF Operations Fleet Manager UI to create the cluster in WLD-02.
CUse the SDDC Manager UI to create the cluster in WLD-02.
DUse the vSphere Client UI to create the cluster in WLD-03.
A user tries to deploy a catalog item to a vSphere Namespace in a VMware Cloud Foundation (VCF) Automation Organization for All Apps. The catalog item cannot be deployed to zone3.
The following information is available:
The vSphere Supervisor has three zones: zone1, zone2, and zone3.
The user has successfully deployed the catalog item to zone1 and zone2 in the vSphere Namespace.
What is causing this issue?
AThe vSphere Namespace does not include zone3.
BThe user does not have Project Advanced User role for the vSphere Namespace.
CThe vSphere Namespace is assigned the default large vSphere Namespace Class.
DThe user does not have the Project User role for the vSphere Namespace.
An NSX Edge node appears in the inventory but has a “Not Ready” status in the NSX Manager UI.
What should the administrator verify first?
AThe NSX Edge node’s uplink network configuration
BThe NSX Edge has been added to an Edge cluster
CThe license key in NSX Manager UI
DThe NSX Edge node's CPU reservation
An administrator has noticed that the vSphere Global Inventory is available only from the management domain vCenter. The Global Inventory is unavailable from the workload domain’s vCenter.
Why is the “Global Inventory” absent from the workload domain’s vCenter?
AAn external VIDB instance has not been configured.
BAn inventory sync was not run following the workload domain creation.
CSupervisor Management has not been enabled.
DVCF SSO and vCenter Linking have not been configured.
An administrator needs to expand a VMware vSAN cluster in a workload domain by adding an unassigned host through the vSphere Client. However, no hosts are available on the Host Selection screen, and the following message is displayed:
> No unassigned hosts available with storage type VSAN. Commission hosts with physical NICs 0 & 1 to Add Host from UI.
How can the administrator commission hosts?
AFrom VCF Operations by navigating to Fleet Management.
BFrom the vSphere client by navigating to Supervisor Management.
CFrom the SDDC manager by navigating to Workload Domains.
DFrom the vSphere client by navigating to the Global Inventory.
An administrator is planning to upgrade a VMware Cloud Foundation (VCF) management domain from VCF 5.0 to VCF 9.0.
After configuring the online depot, the administrator can see the SDDC Manager 9.0 upgrade bundle. However, the 9.0 upgrade bundles for vCenter, ESX, and NSX are not shown.
How can the administrator resolve this issue?
AUpgrade the SDDC Manager to 9.0.
BUse the VCF Offline Bundle Transfer Utility (OBTU) to download the missing 9.0 upgrade bundles.
CUse the VCF Download Tool to download the missing 9.0 upgrade bundles.
DUpgrade the management domain from VCF 5.0 to VCF 5.2.
An administrator is investigating network-connectivity problems on a VMware ESX host configured with a dedicated VMware vSAN vSphere Distributed Switch (vDS) port group. The VMware vSAN vDS port group has two physical adapters and two assigned uplinks. After the active physical adapter failed, the vSAN vDS connection across the vSAN network was lost.
What caused the issue?
AThe vSAN storage policies are misconfigured.
BA physical adapter is set to "Not Used" in the vDS configuration.
CVLAN tagging is not correctly configured on the vDS.
DThe vDS failover policy does not allow failback.
An administrator has successfully mounted an NFS datastore as supplemental storage for a VMware Cloud Foundation (VCF) workload-domain cluster. However, users report that they cannot write data to the datastore.
The administrator confirms the following:
The NFS share is visible in the vSphere Client.
Connectivity from the Virtual Machine to the NFS server.
What should the administrator do next to troubleshoot the issue?
AVerify that the NFS server permissions are not set to read-only for the ESX host.
BVerify the MTU size configuration on the NFS VMkernel port group.
CVerify the NFS server is listed in the VMware Hardware Compatibility Guide.
DReboot the ESX host to clear any file locks.
An administrator is adding a vSphere Supervisor that uses VMware NSX classic to an existing VMware Cloud Foundation (VCF) cluster with Distributed Connectivity. When trying to enable the vSphere Supervisor for the domain, the cluster appears incompatible for the following reason:
No valid edge cluster for VDS 50 0b 4d 9a cb 32 62 4d - 76 78 6b 92 cd 87 c4 5a
Why does the cluster appear incompatible?
AThe NSX Edge transport nodes have been deployed as large.
BThe WCPReady tag has not been assigned to the NSX Edge Cluster.
CAVI load balancing has not been enabled for the NSX Edge Cluster.
DvSphere Supervisor requires Central Connectivity.
Community Discussion