QuestionQ86

VerifiedStateful Firewall and Screen Options

-- Exhibit --

ssg20-> set address "Trust" "192.168.1.0/32" 10.20.1.0 255.255.255.0  
ssg20-> set address "Untrust" "10.204.1.0/24" 10.204.1.0 255.255.255.0  
ssg20-> set address "Untrust" "192.168.1.0/24" 192.168.1.0 255.255.255.255  
ssg20-> get policy id 1  
name:"none" (id 1), zone Trust -> Untrust,action Permit, status "enabled"  
src "192.168.1.0/32", dst "192.168.1.0/24", serv "FTP"  
  
Rules on this VPN policy: 0 -  
nat off, Web filtering : disabled  
vpn unknown vpn, policy flag 00000000, session backup: on, idle reset: on  
traffic shaping off, scheduler n/a, serv flag 00 log no, log count 0,  
alert no, counter no(0) byte rate(sec/min) 0/0 total octets 0,  
counter(session/packet/octet) 0/0/0 priority 7, diffserv marking Off  
tadapter: state off, gbw/mbw 0/0 policing (no)  
  
No Authentication -  
No User, User Group or Group expression set  

-- Exhibit --

FTP sessions from host 10.20.1.10 to server 192.168.1.100 are failing. You generate the output shown in the exhibit. What is causing the traffic issue?

Explanation

The destination address object is configured as 192.168.1.0 with a 255.255.255.255 mask, making it a single-host match for 192.168.1.0. It does not match destination host 192.168.1.100, so the permit policy does not apply to that FTP traffic.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!