QuestionQ85

VerifiedCyber security infrastructure and network access

The following commands are configured on R1:

[R1] acl number 2001  
[R1-acl-number-2001] rule permit source 172.16.105.0 0.0.0.255  
[R1-acl-number-2001] rule deny source any  
[R1-acl-number-2001] quit  
[R1] ftp server acl 2001  

Based on the preceding configuration, only hosts whose source IP addresses are in network segment 172.16.105.0/24 cannot access the FTP service on R1.

Explanation

The ACL permits source IP addresses in 172.16.105.0/24 and denies every other source address. When applied to the FTP server, hosts in that subnet are allowed to access FTP; hosts outside it are denied.

Community Discussion

No comments yet. Be the first to start the discussion!