QuestionQ77

VerifiedEthernet switching network construction

In the switched network shown, STP is enabled on every device. SW1 is the root bridge, and the port costs are as shown. All other parameters use their default values. After the network stabilizes, which ports are alternate ports?

Question Image

Choose two
Explanation

A non-root bridge selects the port with the lowest root-path cost as its root port; on each remaining segment, the bridge advertising the lower root-path cost supplies the designated port, and the other blocked redundant port is alternate. SW4 reaches the root most cheaply through SW3 at cost 40, so its direct SW1-facing GE1/0/3 is alternate. SW5 reaches the root most cheaply through SW4 at cost 50, so its SW3-facing GE1/0/1 is alternate. Huawei documents that root-port selection uses the smallest root-path cost and that an alternate port is blocked after receiving a superior BPDU from another bridge.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!