QuestionQ72

VerifiedBuild an IP network with interconnection and interworking

Assume that the IP address of GE0/0/0 on R1 is 10.0.12.1/24. Several commands can enable OSPF on this interface. Match each command to its configuration view.

Drag & Drop
[R1-ospf-1]
[R1]
[R1-ospf-1-area-0.0.0.0]
[R1-GE0/0/0]
Explanation

Huawei VRP uses a hierarchy of system view, OSPF process view, and OSPF area view: start process 1 with ospf 1, enter backbone area 0 with area 0, then advertise the interface host address using the wildcard mask in the area view. Alternatively, OSPF can be enabled directly on GE0/0/0 with ospf enable 1 area 0 in that interface view.

Community Discussion

No comments yet. Be the first to start the discussion!