QuestionQ57

VerifiedCyber security infrastructure and network access

In the OSPF network shown, all IP addresses can communicate with one another. The following configuration is then added on R1:

[R1] acl 3000  
[R1-acl4-advance-3000] rule deny ip source 10.0.1.1 0.0.0.0  
[R1-acl4-advance-3000] rule deny ip source 10.1.1.1 0.0.0.0  
[R1-acl4-advance-3000] rule deny ip source 10.3.1.1 0.0.0.0  
[R1-acl4-advance-3000] rule permit ip  
[R1-acl4-advance-3000] quit  
[R1] traffic classifier test  
[R1-classifier-test] if-match acl 3000  
[R1-classifier-test] quit  
[R1] traffic behavior test  
[R1-behavior-test] permit  
[R1-behavior-test] quit  
[R1] traffic policy test  
[R1-trafficpolicy-test] classifier test behavior test  
[R1-trafficpolicy-test] quit  
[R1] interface GE 0/0/1  
[R1-GE0/0/1] traffic-policy test inbound  
[R1-GE0/0/1] quit  

Which S1 IP address can successfully ping 10.0.23.3?

Question Image

Explanation

An inbound Huawei MQC policy evaluates traffic against ACL 3000. Packets sourced from 10.0.1.1, 10.1.1.1, or 10.3.1.1 match explicit ACL deny rules and are discarded regardless of the traffic behavior’s permit action. Source 10.2.1.1 matches the final permit ip rule and is forwarded by the permit behavior.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!