QuestionQ54Verified/WLAN O&MCopy linkReport a problemAsk AstroTutorSave questionWhich of the following statements is false about the N+1 backup scenario shown in the figure? AAPs' individual priorities can be configured on the active and standby WACs. A larger value indicates a higher priority.BThe standby WAC3, active WAC1, and active WAC2 can be deployed in different places as long as they can communicate with each other at Layer 3.CCorresponding MAC address whitelists can be configured on active WACs to ensure that APs select the correct active WACs and go online on the WACs.DAP onboarding and service configurations on standby WAC3 must be the same as those on active WAC1 and active WAC2 to ensure that APs can obtain correct configurations after an active/standby switchover.Show AnswerAnswerExplanationIn Huawei N+1 backup, a smaller configured priority value represents a higher priority. Therefore, the claim that a larger AP individual-priority value indicates a higher priority is false. N+1 backup can operate across Layer 3 networks, while the standby WAC must hold matching AP and WLAN service configuration for a switchover to preserve correct AP operation.Learn moreHuawei: Example for Configuring N+1 Backup (APs and ACs in different network segments)Huawei: Example for Configuring N+1 Backup (APs and ACs in the same network segment)Show comments0Show commentsCommunity DiscussionNo comments yet. Be the first to start the discussion!
Community Discussion