QuestionQ50

VerifiedAnalyze

A customer operates an HPE Aruba Networking ClearPass cluster. The customer has AOS-CX switches that use 802.1X authentication with HPE Aruba Networking ClearPass Policy Manager (CPPM).

The switches use local port-access policies.

The customer wants to begin tunneling wired clients that pass only user authentication to an HPE Aruba Networking gateway cluster. The gateway cluster must assign these clients the eth-internet role. The gateway must also assign the clients to VLAN 20.

The intended enforcement policy and profiles are shown below:

Question Image

Question Image

The gateway cluster contains two gateways with the following IP addresses:

  • Gateway 1
    • VLAN 4085 (system IP) = 10.20.4.21
    • VLAN 20 (users) = 10.20.20.1
    • VLAN 4094 (WAN) = 198.51.100.14
  • Gateway 2
    • VLAN 4085 (system IP) = 10.20.4.22
    • VLAN 20 (users) = 10.20.20.2
    • VLAN 4094 (WAN) = 198.51.100.12
  • VRRP on VLAN 20 = 10.20.20.254

The customer needs high availability for tunnels between the switches and the gateway cluster. If one gateway fails, the other gateway must take over its tunnels. The switch must also be able to discover the gateway cluster even if one gateway in the cluster is unavailable.

Refer to the scenario.

Assume that myzone is the name used for the UBT zone.

Which option is a valid minimal configuration for the AOS-CX port-access roles?

Explanation

For Local VLAN User-Based Tunneling, the local AOS-CX port-access role associates the ClearPass-returned switch role, internet-only, with UBT zone myzone and gateway role eth-internet. The switch role does not require vlan access 20; VLAN 20 is assigned by the gateway’s secondary role, as required when the gateway handles client VLAN assignment.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!