QuestionQ97

VerifiedSecure WLAN

A company uses HPE Aruba Networking APs and AOS-CX switches. The APs bridge wireless traffic and receive DHCP IP addresses on VLAN 12. Wireless users are placed on VLAN 18. The company wants the APs to begin using 802.1X authentication. You are configuring the port-access role assigned to the APs after authentication.

What is one recommended setting for that role?

Explanation

For an AP that bridges traffic from many wireless clients, the AP should be the authenticated device while the port permits the downstream client traffic it bridges. AOS-CX device mode authenticates only the first client; once that client authenticates, the port opens and subsequent clients are not individually authenticated on that switch port. Both VLAN 12 for AP addressing and VLAN 18 for wireless-user traffic must remain available.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!