QuestionQ6Verified/System maintenanceCopy linkReport a problemAsk AstroTutorSave questionYou need to replace a failed disk drive on a VSP G700. What two prerequisites are required?Choose twoAYou must use the Replace button in the Maintenance Utility before removing the drive.BYou must wear a wrist strap for ESD protection.CThe red LED on the drive must be lit.DThe Drive Box where the drive is located must be powered down.Show AnswerAnswerExplanationVSP G700 disk drives are hot-swappable, so the drive box remains powered on during replacement. The drive must be prepared for replacement through the Maintenance Utility, and a grounded wrist strap is required to prevent electrostatic-discharge damage. A red drive LED is not mandatory because a failed drive may need to be identified and blocked when that LED is off.Show comments2Show commentsCommunity DiscussionNo comments yet. Be the first to start the discussion!
Community Discussion