QuestionQ50Verified/System maintenanceCopy linkReport a problemAsk AstroTutorSave questionA fan in a VSP E1090 has failed and must be replaced. What is the proper procedure?AUse the MPC for blocking the fan, then replace it.BUse the Maintenance Utility for stopping the fan, then replace it.CRemove the broken fan, then replace it.DUse Storage Navigator for blocking the fan, then replace it.Show AnswerAnswerExplanationA FAN replacement requires the controller on which the fan is installed to be placed in a blocked maintenance state before the hardware is exchanged. For VSP E Series maintenance operations, the MPC is the applicable support interface for performing this blocking operation.Learn moreMaintenance Block — Audit Log User Guide for VSP E SeriesShow comments0Show commentsCommunity DiscussionNo comments yet. Be the first to start the discussion!
Community Discussion