QuestionQ57Verified/Advanced Access ControlCopy linkReport a problemAsk AstroTutorSave questionWhich condition causes IPS Bypass Under Load to activate on a 24-core Check Point appliance?Aany of the CPU cores is above the threshold for more than 10 secondsBall CPU core must be above the threshold for more than 10 secondsCa single CPU core must be above the threshold for more than 10 seconds, but is must be the same core during this timeDthe average CPU utilization over all cores must be above the threshold for 1 secondShow AnswerAnswerExplanationIPS Bypass Under Load uses the busiest individual CPU core, not the average utilization across all cores. It activates when any CPU core remains above the configured threshold for more than 10 seconds. Check Point documents that IPS bypass is controlled by configured CPU and memory high-utilization thresholds.Learn moreCheck Point R81.20 Threat Prevention Administration Guide — Optimizing IPSShow comments0Show commentsCommunity DiscussionNo comments yet. Be the first to start the discussion!
Community Discussion