QuestionQ40

VerifiedNetwork Management and Operation

A company operates two on-premises data center locations. Each data center has a company-managed router. Each location has a dedicated AWS Direct Connect connection to a Direct Connect gateway through a private virtual interface. The router at the first location advertises 110 routes to the Direct Connect gateway using BGP, and the router at the second location advertises 60 routes to the Direct Connect gateway using BGP. The Direct Connect gateway is attached to a company VPC by using a virtual private gateway.

A network engineer receives reports that VPC resources cannot be reached from various locations in either data center. The engineer checks the VPC route table and finds that the routes from the first data center location are not populating the route table. The engineer must resolve the issue in the most operationally efficient way.

What should the network engineer do to meet these requirements?

Explanation

AWS Direct Connect private virtual interfaces support a maximum of 100 advertised routes per IPv4 or IPv6 BGP session; advertising more can cause the BGP session to go idle. Also, a VPC route table can contain at most 100 propagated routes, and that quota cannot be increased. Summarizing the on-premises prefixes reduces the advertisements to within these limits while retaining the existing Direct Connect design.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!